CNC lathe machine spindle tip is made of tool steel, which effectively guarantees the accuracy and service life. The small end diameter of the tip is 70mm, and the large end diameter is 115mm, which can ensure that the plate rollers with blocked holes of 70mm~110mm diameter can be processed.
The internationally renowned brand eight-station turret is used to ensure accuracy and reliability, and can simultaneously meet the needs of automatic flattening, chamfering, turning of external cylindrical surfaces, etc.
CNC LATHE MACHINE Use machine-clamped cutter blocks to improve processing efficiency and ensure that the yield rate can reach more than 96%.
CNC Lathe machine for rotogravure cylinder process:
Maintenance of important positions
(1) Automatic grease pump setting---------- (daily maintenance)
Cycle setting: once every eight hours, ten seconds each time
Usage requirements: 000-grade grease is required
(2) Daily chip removal, dust removal, cleaning and maintenance---------- (daily maintenance)
Dust removal position: turret
Dust removal method: Use an air gun and engine oil to clean the debris in the movable slide rail and spring hole and verify the return to zero.
Dust removal location: All surfaces of the machine tool
Dust removal method: Use an air gun to remove debris and wipe the surface with engine oil or cleaning fluid
(3) Cleaning of machine tool chips and dust--------- (Monthly maintenance) Cleaning location: The upper surface of the bed and the visible screw surface of the guide rail
Cleaning method: After opening the large bellows, small bellows and middle roller shutter
Use an air gun or a magnet to remove internal accumulated chips
Wipe the guide rail and visible screw with gasoline
Cleaning requirements: Meet factory standards
(4) Refueling of the middle roller shutter of the machine tool
Refueling location: At the entrance of the coiled steel belt
Refueling type: engine oil
Refueling cycle: Once a day